A controller that will unlock the full potential of your Talaria Sting MX3, MX4 and MX5.
A complete kit that includes the сontroller, on-board computer, mounting adapter, and ready-to-install wiring harness. Connect everything to the factory connectors and tune the bike to match your riding style.
Compatible with stock and aftermarket battery systems up to 90V.
Retains factory wiring and lighting. The Nucular On-board computer replaces the factory display.
Power tailored to your Sting MX3, MX4 or MX5. Available power depends on your model, battery and settings.
3-year manufacturer warranty and lifetime technical support.
More Power. Smoother Throttle. Less Noise.
Talaria Sting riders notice the difference
from the very first ride:
-
Improved low-speed acceleration. -
Power settings matched to your Sting model and battery. See the FAQ for model-specific details. -
Adjustable speed and current limits to match your setup. Actual top speed depends on the battery, motor, gearing and riding conditions. -
Smooth, jerk-free acceleration and precise throttle control with instant response. -
Clean factory appearance: the OEM-style controller and adapter integrate neatly into the frame. -
Up to 30kW peak controller power for upgraded builds. Actual power depends on the battery, motor, and settings.
Additional features
-
Cruise control for comfortable riding and commuting. -
Up to 3 configurable power profiles. -
More than 200 adjustable parameters with automatic tuning. -
Reverse mode for maneuvering in tight spaces. -
Regenerative braking with energy recovery. -
Bluetooth connectivity and mobile app support for tuning and monitoring.
Complete Plug&Ride kit: everything for a quick upgrade
You get everything required to replace the factory controller with a clean, factory-style installation.
Nucular P24F controller with pre-installed firmware for Talaria Sting
Mounting adapter with bolts for a clean, factory-style installation on Talaria Sting MX3, MX4 and MX5
Ready-to-install wiring harness with connectors to connect Nucular P24F to stock Talaria Sting wiring
A 47.2 in (120 cm) CAN-bus data cable for controller to On-board computer connection
On-board computer with a large 2.9″ high-contrast FSTN display with a fork stem mount
Technical specifications:
the numbers that define performance
the numbers that define performance
The Nucular P24F controller is engineered for high-performance ebikes and advanced drive system tuning. Built around a 32-bit ARM processor, it combines advanced Field-Oriented Control (FOC) with Maximum Torque Per Amp (MTPA) algorithms to deliver efficient, quiet, and responsive motor operation.
Peak power: up to 30kW
Continuous power: 10kW
Operating voltage: 30-90V
Maximum phase current: 500A
Maximum battery current: 350 A
Operating temperature: -30°C to +80°C
Efficiency: up to 98%
Weight: 1.44 kg
Protection rating: IP54
Dimensions: 205×98×50 mm
Installs into factory mounts with factory-compatible connectors
The Plug&Ride kit is designed for straightforward self-installation. Every component is prepared and ready to connect.
Factory-compatible connectors pre-installed
Every wire is fitted with connectors that match the factory wiring harness. Simply connect the plugs, secure the phase wires, and mount the adapter.
Firmware for the Talaria Sting already installed
Check the battery settings for your Sting model, then run Auto-setup to calibrate the motor parameters.
The kickstand sensor, fall sensor, throttle and ignition switch remain functional, along with headlights, brake light and turn signals on road-legal versions. The factory display is replaced by the Nucular On-board computer. Power modes can be selected using the compatible factory switch or the On-board computer.
Watch our step-by-step video guide for a quick and easy controller installation
Fully programmable system for ultimate bike control
The controller adapts to your riding style.
For those who need a turnkey solution
Auto-setup measures the motor’s inductance and resistance to calibrate the controller for your motor.
Configure up to three control modes and reverse through the Nucular On-board computer. Factory switch operation depends on your Sting version and configuration.
Check the battery and control mode settings for your MX3, MX4 or MX5 before riding. MX3 and MX4 use stock 60V batteries; MX5 uses a stock 72V battery. Battery versions require different settings. Check Controller > Battery and Controller > Control modes for your configuration.
For those who demand ultimate control
Over 200 parameters for complete DIY customization.
Fine-tune current and torque curves to customize bike response for every degree of throttle twist.
Customizable regenerative braking profiles: set your preferred deceleration rate and energy recovery to the battery.
Flexible motor and controller thermal limits: define temperature thresholds for smooth power throttling.
Advanced field weakening and current limits give you total control over top speed and power output in every single riding mode.
Adjust power and other parameters on the fly via the On-board computer
The Nucular On-board computer replaces the factory Talaria Sting display and comes with a fork stem mount. The screen displays current speed, total odometer, trip distance, riding modes, and more.
High-contrast monochrome FSTN display with an ambient light sensor and built-in heater. It won’t fog up in humid weather and ensures zero lag in freezing temperatures.
Adjust controller settings directly through the menu: change current limits, regen strength, throttle curves, and more—with no phone required.
The regenerative braking thumb throttle (sold separately) connects directly to the onboard computer.
Real-time parameter display: customize your screen to show exactly what you want (power, voltage, mileage, temperatures, battery level, and more).
Switch power profiles easily using the buttons right on your onboard computer.
Nucular App: tune your bike right from your phone screen
Connect your phone to the controller and manage your bike through an intuitive graphical interface.
A Bluetooth module is required for the app to function. It is sold separately and is not included in the base kit.
All features in a single interface: adjust parameters, fine-tune current and torque curves, set limits, configure regen profiles, and more.
Intuitive dashboard: your phone screen displays speed, mileage, battery level, and all other key metrics—just like the onboard computer.
The app is available for both iPhone and Android. Download it from the App Store or Google Play and connect to your controller in seconds.
The app completely replaces the On-board computer. If you prefer managing your bike via smartphone, you don't need the display.
A complete suite of solutions for a smooth, safe ride and reliable bike performance.
Every mile of your ride is powered by electronics built for extreme environments. Here is how the Nucular controller maintains long-term performance.
-
Up to 98% efficiencyThe Field-Oriented Control (FOC) algorithm with reduced switching loss mode minimizes energy lost to power MOSFET heating. As a result, the battery delivers more useful work and drains slower under identical loads. -
Phase short-circuit protectionIn the event of a phase-to-phase short circuit, the controller will detect the anomaly and shut down the output stage. Wiring faults are prevented at the hardware level. -
Sleep current less than 300 µAWhen powered off, the controller consumes minimal energy. Your bike can sit for weeks without recharging, while the battery maintains its charge level. -
Regenerative braking with battery chargingDuring deceleration, the controller converts kinetic energy into electricity and feeds it back into the battery. This extends your range by 5−15% depending on the terrain, while brake pads wear out 2 to 3 times slower. -
Motor and controller thermal managementTemperature sensors monitor motor windings and the controller heatsink in real time. Upon reaching critical values, the system smoothly reduces power, protecting components from overheating during long climbs and in hot weather. -
Hardware-level overcurrent and short-circuit protectionBuilt-in circuitry shuts down the controller in the event of overcurrent or a phase wire short circuit. The electronics react within microseconds, preventing power MOSFET burnout.
Strong community, tech support via messengers, firmware updates,
and warranty service.
and warranty service.
When you buy a Nucular controller, you get an official manufacturer warranty and lifetime access to support from the very engineers who designed the hardware and software.
- Support chatFeel free to ask questions about installation, setup, and diagnostics. Support is available in any language.
- Owners communityOur group chats bring together thousands of riders. Share your experience and connect online.
- Firmware updatesAre released regularly and can be installed via the Bluetooth module or an SD card in the onboard computer. New features, improved algorithms, and bug fixes are always available for free.
- Worldwide warrantyEnjoy peace of mind with a 3-year warranty on your controller and 1 year on the On-board computer. We also provide full post-warranty service and repairs whenever needed.
We manufacture electronics for Light Electric Vehicles (LEVs), including e-bikes, go-karts, electric surfboards, paramotors, utility vehicles, and tracked vehicles.
designing electronics since 2014, trusted by riders in 70 countries worldwide
In-house hardware and proprietary software for seamless compatibility.
20+ distributors and manufacturing partners worldwide.
We continuously expand our software functionality and customize firmware for OEM manufacturers.
Rated 4.6 out of 5 on Trustpilot. Users consistently praise our product quality, regular updates, and responsive tech support.
Joint projects with international brands: Nucular electronics power electric vehicles from HPC Bikes (USA), Havoc bike (Czech Republic), Jetscooter (Greece), and many more.
We proudly support educational projects and racing teams. Building an electric vehicle for a student project or competition? Contact Nucular engineers.
This kit is perfect
for anyone looking to upgrade their Talaria Sting MX3, MX4 or MX5
for anyone looking to upgrade their Talaria Sting MX3, MX4 or MX5
Want a power and speed boost for daily riding without a complex upgrade.
Want to stand out and give their bike a sleek look with an aesthetic adapter.
Seek total control and ultra-smooth motor performance for a comfortable ride, even off-road.
Compete in amateur or semi-professional races where high peak power and flexible parameters are critical.
Want a reliable controller with hardware-level protection to safely use their bike for daily commuting.
Nucular is the choice of those who:
What riders who upgraded to Nucular are saying
The P24F is the smoothest controller. Even a basic setup gave me smooth, predictable throttle response. It’s now my favorite controller and the one I’d recommend for a Sur-Ron, Talaria or E Ride Pro.
Zilly Milli
The build quality of those products are amazing. Throttle response is quite unique.
After sell service is quick, easy and efficient. The people working there are nice and pleasant.
After sell service is quick, easy and efficient. The people working there are nice and pleasant.
Patrick B.
It literally looks OEM. Super smooth throttle. That was the easiest controller we've ever put on, which is super awesome.
Talaria Boys
Available power depends on your Sting model, battery version and controller settings. Check the battery label to identify your battery:
MX3 — Greenway 60V 38.4Ah battery: up to 8.1kW.
MX4 — Greenway 60V 45Ah battery: up to 10.8kW.
MX4 — SCUD 60V 45Ah battery: up to 8.1kW.
MX5 — Greenway 72V 40Ah battery: up to 15.1kW.
Top speed depends on the battery, motor, gearing, tires, rider and riding conditions. There is no single top-speed figure that applies to all Sting models and battery versions.
MX3 — Greenway 60V 38.4Ah battery: up to 8.1kW.
MX4 — Greenway 60V 45Ah battery: up to 10.8kW.
MX4 — SCUD 60V 45Ah battery: up to 8.1kW.
MX5 — Greenway 72V 40Ah battery: up to 15.1kW.
Top speed depends on the battery, motor, gearing, tires, rider and riding conditions. There is no single top-speed figure that applies to all Sting models and battery versions.
Yes. This kit is designed for Talaria Sting MX3, MX4 and MX5. Battery and control mode settings depend on your model and battery version. Talaria XXX and XXX Pro require a separate kit with different wiring and mounting adapters.
Yes. The P24F supports the stock 72V battery used on the Sting MX5. A compatible 72V battery can also be used in an upgraded MX3 or MX4 build. Battery compatibility and controller settings must be checked for the specific setup. The battery voltage must remain within the controller’s 30-90V operating range, including at full charge.
Yes, technically it is possible, provided that the display supports our LEVCAN communication protocol. One known example of a compatible third-party display is the EggRider C1.
Yes. Once the controller has been configured, the on-board computer can be disconnected and the bike can be used without it. You can also use the optional Bluetooth module and smartphone app instead of the on-board computer.
The kickstand sensor, fall sensor, throttle and ignition switch remain functional, along with headlights, brake light and turn signals on road-legal versions. The factory Talaria display is replaced by the Nucular On-board computer. Factory switch operation depends on your Sting version and configuration.
We ship orders from Hong Kong worldwide via DHL, UPS, and FedEx for a flat rate of $70. Delivery times depend on the distance to your address. Orders are shipped within two business days with tracking information provided.
No, we cover all import duties, VAT, and customs fees — you won’t pay anything extra upon delivery.
Trustpilot Rated 4.6 / 5